Marrakech - Almond

There can be a big difference between how a color is represented on a screen and how it is experienced in real life. It is important to keep in mind when choosing color.

There can be a big difference between how a color is represented on a screen and how it is experienced in real life. It is important to keep in mind when choosing color.

Physical color cards can be purchased here

Marrakech lime paint is an effect paint that is suitable for decorating individual walls in the home, where you want a distinctive and exclusive look.

The paint can be applied in several ways and the expression will vary depending on the technique chosen. The surface will appear raw and changing. It can be used on all mineral surfaces such as plaster and plaster.

For inspiration click here

Application

The lime paint can be applied with a roller, brush, sponge or putty knife. Stir the paint well. Dilution is not necessary. If necessary, lightly dampen the wall before applying. Apply the paint in a rich layer with a wide brush in natural hair, spatula or both. Apply the paint in uneven or irregular strokes. Remember to work wet in wet and finish one surface at a time. Let the paint dry as it is 7-8 hours before further treatment or 15-20 min, until parts of the paint dry up lighter, after which the surface is smoothly smoothed with a flat spatula. The last model will give a less contrasting expression when further processing.OBS! Protect skin and eyes during work. Lime is alkaline and therefore has a corrosive effect.

For how to apply Marrakech please click here

Pretreatment

The surface must be raw, clean and free of dust, grease and dirt before treatment. The surface must be mineral. Or you have to use Wall – Prim first, before applying Marrakech

Post processing

After 7-8 hours, the surface can be sanded with grain 400 to get a softer surface. You can also work the wall over with a flat spatula with light pressure in to give it more character and a glossy effect.

Final treatment

The surface can be treated with lime soap to get a more dirt-repellent surface. The surface must dry in. 7-10 days before this treatment.

Covers

5-7 m2 / liter.

Drying time

7-8 hours.

Cleaning

Clean utensils in water immediately after use.

Expiration

Approx. 6-12 months in airtight packaging in frost-free surroundings.

Safety

Wear goggles and gloves during work. Lime is alkaline, and thus corrosive, therefore eyes and skin must be protected during work. If you get it on the skin, rinse immediately with water.

Malkode

00-4.

The product does not contain MI,BIT or VOC.