

Note! this is not a stock item, it needs to be produced, so expect 3-4 days longer delivery time than our other products.
We strive to deliver within 2-4 business days. NOTE! on wallpaper there is 7-14 days delivery time.
We have a 30 day return policy. Tinted paint and wallpaper are an exception. They cannot be returned
Sand putty/filler from decor paints is a diffusion-open, medium-fine filler produced on an indoor climate-labeled water-based oil emulsion base completely without the use of plastic and substances that are harmful to health. The sand putty is open to diffusion and thus allows the wall to breathe and release any moisture from the substrate, which is transported out of the room by ventilation. The diffusion openness partly causes an improvement of the indoor climate and at the same time avoids moisture accumulations, which can damage the substrate and cause mold & fungus formation. The sand putty is suitable for indoor walls & ceilings.
The product does not contain MI, BIT, VOC or microplastics
Note! This is an order item and a 3-4 day longer delivery time can be expected than on our other products.
Application
The sand filler is applied to cleaned rough surfaces, eg plaster, with a wide filler in layers of 2-3 mm. Fuller layers must be built up in several rounds with a drying time of 24 hours between the layers. The sand putty can be sanded or water scrubbed after drying.
Pretreatment
The surface must be clean, rough and free of dirt, dust and grime.
Covers
Approx. 2-6 m2 / liter depending on layer thickness.
Drying time
Approx. 24 hours.
Post processing
When the sand putty has been sanded, apply 1 coat of primer and 1-2 coats of final paint.
Dilution
Water (max 5%).
Cleaning
Tools used during work are cleaned in water.
Expiration
Approx. 2-3 months from date of purchase for cool, frost-free storage in original packaging.
Contents
Water, powdered marble, fillite, stand oil, rapeseed oil, cellulose glue. The sand filler is produced without the use of volatile solvents. The sand filler contains 0 g VOC / l. EU limit value for this product (cat A / a): 30g VOC / l (2010)
The product does not contain the preservative: MI (methylisothiazolinone).
Mal-kode
00-1
You might also like